Therm-X Contrast Therapy System

Protect a $6,000 machine on the road. The Therm-X AT is built to travel — 14 lbs with a carry handle. This case is what makes that practical: a padded, purpose-fit shell for the unit and its hose, so the machine survives the bus, the baggage hold, and the back of a truck. Purpose-fit for the Therm-X AT control unit Room for the umbilical hose so the whole setup travels together Made for road games and home visits — or just moving between treatment rooms without carrying the unit bare Cheaper than one repair. A cracked housing or bent fitting costs more than the case

Read more less

Three-piece extender kit so your one-size garments actually fit everyone. Therm-X garments are one-size-fits-most — but "most" isn't everyone. This kit adds reach to the shoulder, hip, and back garments so larger patients and bigger athletes get the same correct, even compression as everyone else. Three straps covering the garments most likely to run short Keeps compression even — an over-stretched garment loses contact and treats unevenly Commercial-grade hook-and-loop matched to the garment closures Worth keeping on hand if you treat linemen, heavyweight athletes, or a general adult population Works with the Therm-X AT durable garment line.

Read more less

One garment covering foot, ankle and calf — for injuries a joint wrap can't reach. The half leg boot treats the whole lower leg in a single application: foot, ankle, and calf through to mid-shin. Where an ankle garment targets one joint, this covers the full field for Achilles repairs, calf strains, tib-fib fractures, and post-operative edema that runs the length of the limb. Built for the treatment room Full lower-leg coverage — foot through calf in one wrap, no stacking two garments One size fits most, and bilateral — works on either leg, so you stock one instead of two Sealed coolant path calibrated to hold the correct temperature across the whole treatment area Quick-connect fitting with self-sealing valve — detach without draining the line Waterproof ripstop inner face that wipes down clean and resists mold and mildew Common applications Achilles tendon repair, calf strain, tibia and fibula fracture recovery, compartment syndrome, post-operative lower-leg edema, and lymphedema protocols. Requires a Therm-X control unit (sold separately). Buying for a clinic or training room? Request a quote and we'll package it with the machine.

Read more less

Seven anatomical garments for the Therm-X AT and Therm-X HOME. Bilateral, one size, no lefts and rights to stock. Each Therm-X garment uses a sealed internal flow path that directs coolant across the treatment area and is calibrated to hold the correct temperature at that specific joint — a knee garment and a shoulder garment are not the same wrap in different shapes. Why they last in a busy clinic Bilateral fit — one garment works on either side of the body, so you carry half the inventory of a left/right system Quick-connect hose fitting with self-sealing valves keeps coolant in the line when staff detach mid-session Ripstop nylon inner face with waterproof backing — wipes down clean and resists the mold and mildew that ruin fabric wraps Numbered fitting steps printed on the complex garments so any staff member or patient can apply them correctly without a demo Commercial-grade hook-and-loop rated to last the life of the garment, not a season Choose your treatment area Shoulder — rotator cuff repair, labral repair, impingement, post-op immobilization Knee — ACL and meniscus reconstruction, total knee replacement, patellar tendinopathy Elbow — lateral and medial epicondylitis, bursitis, elbow arthroplasty Ankle — sprains, fracture recovery, Achilles repair, post-op edema Back — lumbar strain, post-surgical pain management, nerve block recovery Hip — hip arthroplasty, labral repair, groin strain Hand / Wrist — carpal tunnel release, distal radius fracture, post-op swelling Need full lower-leg coverage instead? See the half leg boot garment. Treating larger patients? The 3-piece extender strap kit adds reach to the shoulder, hip and back garments. Requires a Therm-X control unit (sold separately). Ordering several at once for a clinic or training room? Request a quote and we'll package them with the machine.

Read more less

Run two garments from one Therm-X unit. The split umbilical hose divides a single control unit's output across two garments — so one machine can treat both knees after a bilateral procedure, cover a shoulder and an elbow in one session, or serve two athletes back-to-back without swapping lines. Doubles the throughput of a single control unit — usually cheaper than a second machine Self-sealing quick-connect fittings at both garment ends, so detaching one side doesn't drain the system Compatible with the Therm-X AT and the full Therm-X garment range

Read more less

Hospital-grade power supply for the Therm-X AT. Many hospitals, ambulatory surgery centers and inpatient rehab facilities require hospital-grade power connections for any equipment used in a patient-care area. If your facility's biomedical engineering department has that standard, this is the power supply your Therm-X needs to pass inspection. Hospital-grade rated for patient-care environments Direct manufacturer part for the Therm-X AT Check with your biomed department before ordering — if they require hospital-grade, the standard supply will be rejected at intake

Read more less

Genuine Therm-X coolant, 1 quart. The consumable that keeps your unit running. Therm-X units run on a distilled water and isopropyl alcohol coolant mix rather than ice. This is the manufacturer's replacement fluid, formulated to hold the unit's rated temperature range without the corrosion or residue that off-spec substitutes leave in the pump and lines. 1 quart — compatible with the Therm-X AT and Therm-X HOME Protects the pump and radiator — using the wrong fluid is the fastest way to a service call Keep a spare on the shelf. A treatment room with an empty tank is a treatment room out of service Ordering for a clinic or training room? Ask us about case pricing.

Read more less

Four modalities. One 14-pound machine. About a quarter the price of a Med4 Elite. The Therm-X AT delivers cold, heat, contrast, and intermittent compression from a single portable unit — the same four-modality capability as Game Ready's Med4 Elite, at roughly 27% of the cost. Unlike cold-only systems, it never needs ice: fill the tank with distilled water and isopropyl alcohol and it holds temperature on its own. Built for a working treatment room Cold 34–55°F, heat 105–110°F, contrast cycling 38°F to 105°F for up to a 60-minute session Programmable protocols — 3 to 40 minute cycles, preset or custom, on a touchscreen any staff member can run No ice, ever. No cooler runs, no mid-session refills, no melt-water mess Liquid-cooled radiator and fan gets the garments colder and keeps the unit quiet enough for a shared treatment space 14 lbs, 10" x 9" x 15", carry handle — travels to away games and moves between rooms without a cart USB fast-charge port so patients stay put and stay compliant through a full cycle Cleared for more than sports medicine FDA 510(k) cleared (K240125) for post-surgical and acute injury edema, swelling and pain — and additionally for lymphedema, chronic venous insufficiency, and DVT prophylaxis. That range of indications lets one unit serve orthopedic post-op, sports rehab, and vascular protocols on the same treatment schedule. How it compares   Therm-X AT Game Ready GRPro 2.1 Game Ready Med4 Elite Cold 34–55°F 35–50°F Yes Heat 105–110°F No Yes Contrast cycling Yes, up to 60 min No Yes Compression Yes Yes Yes Requires ice No Yes, every session No Weight 14 lbs ~13 lbs ~28 lbs What else you'll need The control unit ships without garments. Choose at least one anatomical compression garment — shoulder, knee, elbow, ankle, back, hip or hand/wrist, all bilateral and one-size — or the half leg boot for full lower-leg coverage. You will also want coolant on hand. Browse all Therm-X supplies and replacement parts, or see the complete Therm-X system. Buying for a clinic, school, or surgery center? We accept purchase orders and quote requests, and we'll price a multi-garment package for you. Most orders placed before 3 PM EST ship the same day.

Read more less

Genuine standard replacement power supply for the Therm-X AT. Direct manufacturer part for units in clinics, training rooms and home settings that do not require the hospital-grade version. Standard-grade — for non-patient-care environments Direct manufacturer replacement for the Therm-X AT Need hospital-grade instead? See the Therm-X Hospital-Grade Power Supply

Read more less

Genuine single-connector umbilical hose for the Therm-X AT. The hose is the part that gets stepped on, rolled over by a cart, and yanked when a patient shifts. It is the most common wear item on any circulating therapy system. Single-garment connector with self-sealing quick-connect fitting Direct manufacturer replacement — no adapters, no fit guessing Worth keeping a spare. A failed hose puts a $6,000 machine out of service over a $226 part

Read more less